Below is informtion on the calibrator used to calibrate the Breath Alcohol Tester machines.
Economical High Quality Alcohol Breath Test Simulator
 This calibrator is approved by the National Highway Traffic Safety Administration (NHTSA) and published on their Conforming Products List (CPL). Simulator has an improved mercury-in-glass serialized thermostat. Components within the wet chamber area of the simulator are rust resistant, chrome plated, or stainless steel. The all metal non-magnetic top housing is chrome plated brass, preventing rust and corrosion. This provides for uniform headspace heating and outstanding mechanical security for all fasteners. The simulator has a power switch and long life power and heater indicator lamps. The simulator is provided with a high precision, serialized NIST reference mercury-in-glass thermometer to monitor temperature of the solution.
PERFORMANCE
| Temperature range | 34ĄC ± .2ĄC |
| Warm-up time from cold start | less than 20 minutes |
| Nominal liquid level | 500 ML ± 5% |
| Laboratory Glass Container | 500 ml ± 5% fill mark molded into glass |
MECHANICAL
| Weight: | 3.6 lbs. (1.634 kgms) |
| Size (HxWxD): | 9.0 x 3.75 x 4.50 (228.60 mm x 95.25 mm x 114.3 mm) |
| Weight: | 3.6 lbs. (1.634 kgms) |
| Inlet Tube: | 3/4 (19.05 mm) Extended from top surface of housing |
| Outlet Tube: | 3/4 (19.05 mm) Extended from front surface of housing |
| Inlet Tube: | 3/4 (19.05 mm) Extended from top surface of housing |
Top housing is square to eliminate Roll Around and for greater ease of removing and tightening simulator container.
ELECTRICAL
| Power Input: | Domestic: 105/130 VAC @ 60 Hz |
| Foreign: | 220/240 VAC @ 50 Hz |
| External Safety Fuse: | Easy, accessible plug-in 1.0 AMP fuse |
| Power Switch: | Single Pole mounted in top housing |
| Indicator Lamps: | Power Lamp: Neon |
| Heater Lamp: | Neon |
| Temperature Controller: | Serialized Mercury-in-Glass Thermostat |
| Immersion Heater: | A safety ground wire is welded to the heater housing to prevent electrical shock hazard. |
| Printed Circuit Board: | High quality, through hole plated circuit board |
TEMPERATURE MONITOR
NIST Mercury-in-Glass serialized reference thermometer
OPTIONS
Simulator Protector - Simulstand (Lexan with anodized aluminum spacers)
SURE-LOKTM CONNECTORS
Male and Female connectors prevent accidental, improper connection to breath analyzer.
STANDARD WARRANTY
One Year - Parts and Labor
Certified Alcohol Stock Solution Ampoules for use in Breath Test Simulators
 PERFORMANCE
Certified Alcohol Stock Solution is prepared and packaged under the highest quality standards, using Type I water and USP ethyl alcohol.
A precise concentration of a working solution is prepared when the contents of the ampoule are properly mixed with purified water in a 500 ml Class A volumetric flask. This solution is now ready for use in an alcohol breath test simulator to test or calibrate Alcohol Breath Test Instruments.
CONCENTRATION
Certified Alcohol Stock Solution Ampoules are prepared in standard concentrations to give an alcohol breath test instrument the following readings:
.05 gms% .10 gms% .15 gms%
Other concentrations are available.
PACKAGING
Packaged twelve (12) per box.
| 
the Calibrator
Patents
2008 © Breath Alcohol Testers Ltd., ALL Rights Reserved.